Baofeng UV-82 Dual Band Radio with VOX function

Baofeng UV-82 Radio with VOX function / Dual Band. Battery with the longest life on the market, up to 18 hours of use. 128 programmed channels and 136-174 / 400-520 MHz frequency. The Baofeng model is the best product on the market. THE BAOFENG UV-82 SERIES. The Baofeng UV-82 series has raised the bar for affordable amateur radio technology! Compared to previous Baofeng products (UV-5R, GT-3, and the v2+ Series), the UV-82 comes with a much louder speaker (1 watt), a much more solid case with larger buttons, and a new chipset and PCB board that outperforms the range, accuracy, and output of previous Baofeng chipsets. It is not simply a remake, but a new radio from the ground up. It outperforms the 2nd Gen UV-5R chipset (used in the UV-5R, GT-3, BF-F8+, and v2+ series). VERSATILE RADIO FOR AMATEUR USE. The Baofeng UV-82 is legal for use on amateur frequencies. The UV-82 is capable of transmitting in narrowband (12.5 KHz) and wideband (25 KHz). DUAL WATCH RECEIVER. The Baofeng UV-82 has a built-in receiver but can "watch" two channels (semi-duplex). Monitor two different frequencies (even on different bands (VHF/UHF)) and the radio will monitor both frequencies, giving priority to the first station to receive a call. FM BROADCAST STATION. You can listen to the FM Broadcast radio while still monitoring your radio frequencies in the background. Priority will be given to any incoming call, ensuring you never miss an important call while listening to the radio. GROUP TONES SUPPORTED. The Baofeng UV-82 supports the most common analog tones. It supports CTCSS, DCS, and DTMF calling methods. Set up your calling methods to call by group tones. The call tone (private line) is required by most repeater applications and the UV-82 supports the latest standards. The Baofeng UV-82 can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones. INTERNAL VOX FUNCTION. The Baofeng UV-82 has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation and can be used in conjunction with the included earpiece and microphone. The VOX level and VOX delay time are adjustable to your needs. CUSTOMIZE YOUR OPERATION WITH CHANNELS, PROGRAMMABLE BUTTONS, AND MORE! You can program your Baofeng UV-82 exactly as you want. There are 128 programmable memory channels. You can add or remove channels from the scan list using free computer software. You can give channels alphanumeric names using a computer. The radio has 2 power levels (5 watts maximum), allowing you to choose how far you can communicate. You can set VFO limits using the CHIRP software. You can easily program from a PC to configure the radio to operate exactly as needed. WHAT'S IN THE BOX? Baofeng UV-82, 1800mAh Battery, Antenna, Power Adapter, Earpiece, Belt Clip, Hand Strap, Battery Charger, User Manual. FEATURES: 25KHz / 12.5KHz Switchable (Wide/Narrow band), FM Radio (65.0MHz-108.0MHz), Large Tri-color LCD display (3 selectable colors), LED Flashlight, High/Low RF Power Switchable, VOX, 50 CTCSS / 104 DCS Tones, Tone search / scanning, Dual standby, PC programmable, Transmitter time-out timer (TOT), Busy channel lock-out (BCLO). UV-82 SPECIFICATIONS: Frequency Range: [TX] 136 - 174MHz, 400 - 520MHz, [RX] 136 - 174MHz, 400 - 520MHz, 68-108MHz (FM Broadcast). Channel Capacity: 128 Channels. Channel Spacing: 25KHz (wideband) / 12.5KHz (narrowband). Sensitivity: ≤0.25μV (wideband) / ≤0.35μV (narrowband). Operating Voltage: 7.4V DC ± 20%. Battery: 1800mAh. Frequency Steps: 2.5, 5, 6.25, 10, 12.5, 20, 25, 30 and 50 KHz. Antenna: Antenna Connector: SMA-Female / Antenna Impedance: 50Ω. Accessory Connector: Kenwood 2 Pin Standard. Stability: ± 2.5ppm. Output Power: 5W / 1W. Audio Output Power: 1000 mW / 10% (1 Watt). Frequency List: Channel 1 462.125 – RX TX 69.3 Hz CTCSS, Channel 2 462.225, Channel 3 462.325, Channel 4 462.425 RX 103.5 Hz CTCSS, Channel 5 462.525 RX 114.8 Hz CTCSS, Channel 6 462.625 RX 127.3 Hz CTCSS, Channel 7 462.725 RX 136.5 Hz CTCSS, Channel 8 462.825 RX 162.2 Hz CTCSS, Channel 9 462.925 RX 025n DTS, Channel 10 463.025 RX 032n DTS - T-DCS D051N, Channel 11 463.125 RX 125n DTS, Channel 12 463.225 RX 155n DTS, Channel 13 463.525 RX 331n DTS, Channel 14 450.225 RX 023n DTS, Channel 15 460.325, Channel 16 469.945 RX 203.5 Hz CTCSS. Configuration: Menu option 40 - Reset All. Baofeng channel usage configuration: Reset and make it work to use channels 2, 3, and 10. Menu option 40 - Reset All (press menu again). To change language (from Chinese to English): Option 14 - Voice, switch to English and click menu. To change the numeric input, setting it to the correct number: Option 1 - called "STEPS" (Sleep), enter and decrease to 1, then 2.5 x 2.5.