Inmetro-certified explosion-proof flashlights

EXPLOSION-PROOF FLASHLIGHT Body made of cast aluminum, with a threaded closure and locking screw, powered by two large D-cell batteries, 8mm tempered glass lens, "on/off" operation, internal battery sealing via a rubber casing, and a lanyard hole for handling. Used in areas where there is a risk of explosion in the chemical, petrochemical, paint and varnish, and pharmaceutical industries, flammable product warehouses, offshore platforms, etc. DESCRIPTION | Body made of cast aluminum, with a threaded closure and locking screw, powered by two large D-cell batteries, 8mm tempered glass lens, "on/off" operation, internal battery sealing via a rubber casing, and a lanyard hole for handling. FLASHLIGHT COMPONENTS LENS: Made of 8mm thick tempered glass, resistant to thermal shock and impacts. INTERNAL REFLECTOR: Made with an aluminized coating. ILLUMINATION: Via 3-volt LED lamp. OPERATION: Via a brass threaded pin. NOTE | The luminosity of the product is approximately 200 lux. The amount of lux may vary by up to 10% more or less, depending on the angle at which the flashlight is positioned during measurement. Determining the number of Lumens depends on the area of the environment = 1lux = 1Lumen/m². SPECIFICATIONS | 40 mm 74 mm WEIGHT: 0.440 Kg 200 mm ATTENTION | Weights and dimensions are subject to minor changes due to material characteristics. OPERATION AND CERTIFICATION Explosive Atmosphere Zones 1 and 2 | Groups IIA and IIB Temperature Class T6 Operating Temperature | -20°C to +40°C Certificate of Conformity | TÜV 13.0304 RECOMMENDATIONS AND WARNINGS Flashlight suitable for use in environments with explosive atmospheres. Operates with 2 (two) large D-cell batteries. Do not mix new and used batteries. Do not throw batteries into fire. Remove batteries from the flashlight when not in use. Batteries may leak or explode if polarities are reversed. CLASSIFICATION Ex db IIB T6 Gb | In accordance with standards ABNT NBR IEC 60079-0:2011 and ABNT NBR IEC 60079-1:2016. FISCAL CLASSIFICATION | 85131010 Plastcor Technical Development Photos for illustrative purposes. TECHNICAL BULLETIN EXPLOSION-PROOF FLASHLIGHT INMETRO CERTIFIED USAGE | Used in areas where there is a risk of explosion in the chemical, petrochemical, paint and varnish, and pharmaceutical industries, flammable product warehouses, offshore platforms, etc. BATTERY REPLACEMENT | Use the Allen key on the locking screw to open the battery compartment and replace them. ATTENTION | The Allen key is found in a plastic bag, along with the lanyard for handling, inside the unit box. UNIT PACKAGING | Printed cardboard box. This package contains 1 (one) flashlight. The dimensions of this package are 77 x 77 x 208 mm. MASTER PACKAGING | Printed cardboard box. This package contains 4 (four) flashlights. The dimensions of this package are 218 x 165 x 165 mm. STORAGE | Store in a covered and ventilated place. MAINTENANCE | Keep product clean and sanitized. For cleaning, use a clean, dry cloth. USEFUL LIFE | Shall vary according to conditions of use, hygiene, maintenance, and storage. VALIDITY | Indeterminate, non-perishable product. We are not responsible for misuse or poor maintenance.